Technical parameters:
| unit | CH50 | |
Maximum turning diameter of the bed | mm | φ500 |
Maximum tumor diameter on the plate | mm | φ220 |
Bed Wizard Form | mm | 45 degree overall tilt bed body |
Maximum working length | mm | 2000 |
Spindle end type | type | A2-6 |
Outer diameter tool size | mm | 20 |
Tool change time | 秒 | 0.45~1.8 |
Clamping range of hydraulic center frame | mm | 15-105 |
Central frame motion range | mm | 1400 |
Tail Recruitment Travel Distance | mm | 500 |
Tail seat mandrel sports mode | type | Hydraulic |
Tail spindle travel | mm | 100 |
Tail spiral diameter | mm | φ65 |
Taper spindle taper | mt | MT4 |
Number of tools | 8 Workstation turret | |
Spindle speed range | RPM | 50~3500 Step Speed Regulations |
Maximum fast moving speed | m/min | Z:18 X:18; |
Cut feed | m/min | 0.001-5 |
Positioning accuracy | mm | X: 0.01Z: 0.015 |
Repeat positioning accuracy | mm | X: 0.007Z: 0.008 |
Minimum setup unit | mm | X: 0.001 (diameter) Z: 0.001 |
| Chain chip conveyor, wide 980TDI system | ||
English
