| Project | unit | HMC500 |
Workbench (auxiliary workbench
+ round table) | mm | 500X500 |
| Work table indexing |
| 1°X360 |
T-slot (number of slots X slot
width X spacing) | mm | 5X18X100 |
Work table left and right stroke
(X axis) | mm | 700 |
Worktable front and rear stroke
(Z axis) | mm | 810 |
Headstock up and down stroke
(Y axis) | mm | 700 |
Spindle center line to table center
distance(vertical) | mm | 0~810 |
Spindle end to work surface
distance(vertical) | mm | -10-690 |
Spindle center line to work surface
distance(horizontal) | mm | 50~750 |
Spindle end to table center
distance (horizontal) | mm | -130-680 |
| Spindle taper dimension number |
| BT40 |
| Spindle speed | r/min | 20~3000 |
| main motor power | kw | 7.5/11
15 |
| Fast moving speed (X, Y, Z) | mm/min | 2400 |
| Feed rate (X, Y, Z) | mm/min | 1~10000 |
| Machining center minimum setting unit | mm | 0.001 |
| Tool magazine capacity |
| 30 |
| Tool selection |
| random |
| Maximum tool size | mm | 77/130(No knife next to each other)
320/300 |
| Maximum tool weight | kg | 8 |
| Tool exchange time (knife-to-knife) | S | 2.5 |
| Turntable maximum speed | r/min | 5 |
| Dimensions (length X width X height) | cm | 365X280X234 |
English
